EQ2Interface.com
Search Downloads


Go Back   EQ2Interface > Featured Projects > EQ2MAP > EQ2Map Troubleshooting

Reply
Thread Tools Search this Thread Display Modes
  #1  
Unread 08-23-2006, 05:39 PM
Marow Marow is offline
A Young Mystail Rat
 
Join Date: Jun 2006
Server: Antonia Bayle
Posts: 6
Default Couple Issues..

Hello,

First.. Thank you for making the program! Its GREAT!

Then.. couple issues I keep getting and just wondering what I need to do to fix them.

1) Fog of war - Check box to remove/ keep Fog is sometimes there.. most times not...

2) When I hit PoI's and bring up the box, nothing comes up in the box in certain zones. In Qeynos, I get stuff, in Antonicia or TS .. I get nothing or like 1 thing... Is this right or messed up?


Thank you for letting me know..

Marow
Reply With Quote
  #2  
Unread 08-23-2006, 11:37 PM
Marow Marow is offline
A Young Mystail Rat
 
Join Date: Jun 2006
Server: Antonia Bayle
Posts: 6
Default

After reading that.. thought I would be a little more specific...

I will be in Antonica .. zone in.. lil box to remove fog of war.. hit map.. look around.. turn map off.. turn on again.. and lil box is gone.. sometimes it comes back.. most times it doesnt. I want it

PoI's, when I first downloaded the program like 3 months ago.. when I would be in Antonica, there were lots of PoIs that came up. Now I have None. It happened after one of the patches.. probably about 2 months ago.. I am just now getting around to mentioning it.. I have the same problem with Thundering Steps and Nek ....

What can I do to fix the PoI problem?
Is there anything I can do to keep the lil box that removes the Fog of War? Since it happens sometimes like 30%, it drives me crazy when I cant get it pop when I need it.

Anyway..hope that helps a lil more.

Thank you again,


Marow
Reply With Quote
  #3  
Unread 08-24-2006, 11:36 AM
Ruddles Ruddles is offline
A small badger.
This person is a EQ2Map developer.
 
Join Date: Apr 2005
Server: Splitpaw
Posts: 86
Default

The fog of war box only applies in certain areas if I remember correctly, namely the newb zones. Once you start going into Ant and places the data for where you have been is stored on Sony's servers so the box wont work.

As for the other question I'll let someone else answer as I have no idea
__________________
Spirit Of Dawnsong
Reply With Quote
  #4  
Unread 08-24-2006, 11:53 AM
Landiin Landiin is offline
Slayer of clock cycles
This person is a EQ2Map developer.
Featured
 
Join Date: Nov 2004
Server: Oasis
Posts: 3,464
Default

When is the last time you ran the updater? It sounds like you may have some bad files and things need to be updated. Other then that I don't see why the POI's are not show up, unless you have then turned off in the POI menu :P
__________________
Landiin's EQ2MAP Updater Discussion Download
Reply With Quote
  #5  
Unread 08-24-2006, 02:07 PM
matthewzellmer's Avatar
matthewzellmer matthewzellmer is offline
A Brown Bear
Interface Author - Click to view interfaces
 
Join Date: May 2005
Server: Najena
Posts: 12
Default redownload

Try and redownload the EQ2 auto mapper. Just reinstall it and start the updater. This should solve all your problems.

- Frog Soup
Reply With Quote
  #6  
Unread 08-24-2006, 03:24 PM
Marow Marow is offline
A Young Mystail Rat
 
Join Date: Jun 2006
Server: Antonia Bayle
Posts: 6
Default

Thank you for the info.. I will try that..

The funny thing is that the Fog of War box comes up quite often in Non Newbie zones.. like Antonica/Nec/TS and last night in Feerott. Box popped.. you could you remove.. you could put it back to see what you had actually uncovered.. and then.. the box disappeared and never came back.

(also.. I do the updater every time I get on.. I let the updater update,,, then it starts EQ2,,, then I log in and play..)

So.. I will do the suggestions and report back!


Will do it tonight..



Thanks again!

Marow

Last edited by Marow : 08-24-2006 at 03:27 PM.
Reply With Quote
  #7  
Unread 09-08-2006, 06:04 PM
Marow Marow is offline
A Young Mystail Rat
 
Join Date: Jun 2006
Server: Antonia Bayle
Posts: 6
Default

I downloaded and installed over my current files the autoupdater again.

I am still able to use the Fog of war in Antonica, Ferrott, TS.... but its not a constant thing.

After reading my post above.. I think I was using the wrong wording...
When I view my map.. I have dots on the map that show and highlight names, quests etc... when I hit my waypoints box... I have nothing in that box.

When I first started using EQ2Maps.. that box had locations of different mobs thruout the zone and would light up a trail to get to them. Now my waypoints box is empty of PoI's.

Anyone have any other suggestions on how to fix this?

Marow
Reply With Quote
  #8  
Unread 09-08-2006, 09:30 PM
ShadowProwler420's Avatar
ShadowProwler420 ShadowProwler420 is offline
A Griffon
 
Join Date: Nov 2004
Server: Permafrost
Posts: 660
Default

Quote:
Originally Posted by Marow
After reading my post above.. I think I was using the wrong wording...When I view my map.. I have dots on the map that show and highlight names, quests etc... when I hit my waypoints box... I have nothing in that box.

When I first started using EQ2Maps.. that box had locations of different mobs thruout the zone and would light up a trail to get to them. Now my waypoints box is empty of PoI's.
Taking a wild stab in the dark here....

Perhaps you were using the EQ2Map Map Spoiler Project, and need to add that back in?



__________________

"Certainty of death! Small chance of success! What are we waiting for?!"

Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 03:04 AM.


Our Network
EQInterface | EQ2Interface | WoWInterface | LoTROInterface | ESOUI | MMOUI