Fetish Nightfall Full Release - Page 75

Hinton · #**1851** 07-26-2006, 01:22 AM

Oops, I did rattle off a little there, hehe.

The first one. I can't get the Dock to show up after pressing the D. Not using the full set. I'm using the 'pieces' and was hoping for a Classic Update to just use that, but am using the Nightfall's Inventory window XML file for now, with no changes to the file.

**Zonx** · #**1852** 07-26-2006, 06:25 PM

Hinton: You are almost certainly missing the include for the Dock. With Pieces, this line of code is at the very end of eq2ui_inventory_inventory.xml so users don't need to replace the parent file. Technically this isn't legal XML, but it works.

With the full sets, its contained in eq2ui_inventory.xml (legal XML). If you installed just the eq2ui_inventory_inventory.xml from a full set, you'll need to add the following code to eq2ui_inventory.xml

Code:

<include>_Fetish_inventory_dock.xml</include>

soulace · #**1853** 07-27-2006, 10:31 AM

Hello,

Is there a way to make the 3rd person view zoom out "futher"? I would like to see a larger area around my character.

Thank you,

Soul

**gm9** · #**1854** 07-27-2006, 02:20 PM

Quote:

Originally Posted by soulace

Is there a way to make the 3rd person view zoom out "futher"? I would like to see a larger area around my character.

Type

/ics_maxcameradistance 20

(20 is the maximum distance value the game will allow)

Hinton · #**1855** 07-27-2006, 09:22 PM

I'm trying that and just not getting it to work. I've referenced the pieces one to ensure I'm putting it in the right spot, but still can't get that Dock to show up. Tried your eq2ui_inventory.xml file from Nightfall's 6.6 Full and still nothin'.

***EDIT: Got it... not sure what happened, but I got it. Thanks Zonx!!!*** Pst, I can't figure out how to update Classic and get it working after. I tend to break things I touch, lol.

**Zonx** · #**1856** 07-28-2006, 03:57 AM

soulace, You can also add

Code:

ics_maxcameradistance 20

to your eq2.ini, though I thought the max was 15 (up from the old max of 10). Maybe they bumped it up again.

Note: Last I checked SOE still hadn't fixed a bug with the distance slider in the Options window. Setting the slider to the far right would actually reduce your max distance from the default value down to the old max of 10. Once that's happened, the only way I found to get greater than 10 is by adding the ini command or issueing the slash command in game.

**gm9** · #**1857** 07-28-2006, 05:31 AM

Maybe it's even only 15, I think I never checked in detail. However, it doesn't matter, because if you put a value that is too high the game will automatically reduce it to its internal maximum.

And the distance slider issue was still there last time I checked as well.

Hinton · #**1858** 07-28-2006, 06:50 AM

Well, I managed to break it again Zonx. I have the Dock where it belongs, and the Inventory window set to Shrink & Collapse by default, which that's working and the Dock is where it should be, but I have to Zoom the window back to original size, and then back down to shrunken mode to get it to be placed where the Dock is.

Kanorf · #**1859** 08-02-2006, 12:19 PM

When i go to create a new character, I can choose what race I want and if I want to be evil or good, but after that, when I should be selecting facial features, I have nothing there. It just shows my guy but I can't do anything. I have to close EQ2 and restart. Is there an update for this or what am I missing?

TXJustin · #**1860** 08-02-2006, 01:15 PM

I'm having a bit of an issue. I sell all my goods from one character. None of my other characters even have bags/boxes in the broker window, the slots are totally empty.

I can log into one of my non-selling toons and search the broker and sometimes the goods from the selling toon are up, sometimes they are not.

Doing some reading on the EQ2 forums, it appears that when you click into the sell tab, it removes other toons from selling and activates the current character. As fetish does not have a separate tab for selling I don't know if this is being caused by just mousing over the right side of the broker window or what.

Ideas? Like everything Fetish, it's 100 times better than the default skin, so I'd rather not go back to that broker window if I don't have to.

Liandra · #**1861** 08-02-2006, 02:05 PM

Quote:

Originally Posted by TXJustin

I'm having a bit of an issue. I sell all my goods from one character. None of my other characters even have bags/boxes in the broker window, the slots are totally empty.

I can log into one of my non-selling toons and search the broker and sometimes the goods from the selling toon are up, sometimes they are not.

Doing some reading on the EQ2 forums, it appears that when you click into the sell tab, it removes other toons from selling and activates the current character. As fetish does not have a separate tab for selling I don't know if this is being caused by just mousing over the right side of the broker window or what.

Ideas? Like everything Fetish, it's 100 times better than the default skin, so I'd rather not go back to that broker window if I don't have to.

Your trader would only be knocked off if the toon you are on has items listed for sale in the broker window.
The only other option i can think of is if it has been over 24hours since your trader was last logged in.

I have multiple toons as well with only one trader and i dont have any issues the the trader being knocked offline

Madmoon · #**1862** 08-03-2006, 07:01 AM

Is there a file I can edit that adjusts the flora for these buttons? I LOVELOVELOVE this interface. I like less flora - but not no flora

Particularly the G button, which is my default. It has 100 flora, and I would like to permanently move it down, so that I am not always adjusting by going through the options menu. Alternatively, if someone knows a command line I can use, I can create a macro, and just click it after clicking the G button.

Thanks!

**Zonx** · #**1863** 08-03-2006, 05:45 PM

Kanorf, eq2ui_newcharacterscene.xml controls all character creation screens. Haven't had any other reports of problems along these lines so I'm not sure what might be causeing your problem. I suggest you re-extract that file from the ZIP. If all else fails, revert to the default UI to create new toons, then back to Fetish.

Madmoon, display profile settings can be found at
UI/Fetish/infocenter/miscellany/displayprofiles

Each button has its own file with all the relavant settings. You'll also find a readme file in that directory that explains each setting. Note each setting must be repeated for technical reasons. Be sure any changes you make are made to both occurances of each setting.

mynyel · #**1864** 08-04-2006, 07:50 AM

I hope I am posting this to the right thread...I am easily confused =) I was just wondering about the experience bar, I seem to be having trouble with it (as well as my parents who also use the same skin) It goes backwars before it goes forwards. I haven't figured out a pattern but sometimes my experience goes backwards. Any clues on what it might be? Thanks!

Oh I downloaded the Login with Autoplay buttons and it isn't working, I followed the directions in the patch exactly and still not working...any ideas? Thanks!

By the way this is the best skin ever!

Raychel
Heroes Unlimited
46 Swashbuckler
Permafrost

Faoj · #**1865** 08-04-2006, 12:25 PM

mynyel : Are we talking about a little movement here? Say, +/- 0.5?

There is a known "feature" with SOE rounding up the values it reports for (at least) experience. This causes the bar/values to fluctuate occasionally.

I, myself, have seen my exp hit 100.5% without leveling.

mynyel · #**1866** 08-04-2006, 12:30 PM

That is exactly what I am talking about. I am going to be doing some good playing tonight so I am going to watch and report what I see...then maybe you can tell me if it is for sure Sony or a malfunction of my own =)

Raychel
Heroes Unlimited
46 Swashbuckler
Permafrost

Madmoon · #**1867** 08-04-2006, 02:45 PM

Does anyone know if you can REM a line in an XML document? If I make changes, I like to remark them first, so I can back if I really blow it.

**Zonx** · #**1868** 08-05-2006, 03:23 AM

Yes standard HTML commenting works. Example:

Code:

<!-- Some remark -->

**lordebon** · #**1869** 08-05-2006, 07:36 AM

Mynyel,

Thats a current bug thats well known and well despised at the moment.

Whats happening is that whenever your 10ths place of experience is 5 or higher, the ones place is being rounded up (which is incorrect). Thus, a true xp of 67.9 displays as 68.9 but then when you get that .1 and your true xp becomes 68.0 your displayed xp is correctly 68.0 -- but you percieve a loss of .9% xp.

Just write a mental note to check the 10ths and if its 5 or higher, round the ones place down by one to get your actual xp.

This 'bug' is pretty much everywhere an xp percentage is displayed. Unless you want, I wont bother you with the underlying code problem.

mynyel · #**1870** 08-05-2006, 09:52 AM

Quote:

Originally Posted by lordebon

Mynyel,

Thats a current bug thats well known and well despised at the moment.

Whats happening is that whenever your 10ths place of experience is 5 or higher, the ones place is being rounded up (which is incorrect). Thus, a true xp of 67.9 displays as 68.9 but then when you get that .1 and your true xp becomes 68.0 your displayed xp is correctly 68.0 -- but you percieve a loss of .9% xp.

Just write a mental note to check the 10ths and if its 5 or higher, round the ones place down by one to get your actual xp.

This 'bug' is pretty much everywhere an xp percentage is displayed. Unless you want, I wont bother you with the underlying code problem.

Marvelous! Well not really =) Lets hope they get that fixed soon! I hate thinking I have to get double the exp!

Thank you for letting me know though! Thought I was losing what marbles I have!

Raychel
Heroes Unlimited
46 Swashbuckler
Permafrost

Faedilest · #**1871** 08-05-2006, 04:52 PM

how does one pull up infocenter with this ui .. i just downloaded it and dont see how to open it up ..

thanx in advance

**lordebon** · #**1872** 08-05-2006, 09:57 PM

Anyone else getting this message when you edit another player's officer notes?

(null) is not in the guild.

(Or some message like that). It also seemed that the editing notes werent staying 100% of the time (if they did at all).

Taubin · #**1873** 08-06-2006, 12:02 PM

Myself and a couple of my other guildmates have the (null) problem. I thought it was the UI at first, however, 3 of my guildmates that are experiencing this are using the SOE default UI. I ran a quick check on the forums, and found something saying it will be addressed shortly. I will try to find the link and post it.

reubensitos · #**1874** 08-06-2006, 03:35 PM

Any idea if there is a way to make the opened bag size bigger? its like they were scaled down, and if i could get them at 100% that would be fantastic!

Faoj · #**1875** 08-06-2006, 11:34 PM

reubensitos: There are two ways you can adjust the bag size and bag layout.

(1) Download and use the Fetish Customizer - a 'third party' program which will allow you to automate some "standard" modifications to the Fetish UI. You can find it at http://www.eq2interface.com/download...fo.php?id=3870

(2) Read FetishNightfall.doc, which describes how (among other fine-tuning) you can change the bag size and bag layout.