ProfitUI Reborn [Help & Feedback] - Page 51

Aarionn · #**1251** 08-27-2006, 02:39 PM

Hmmm..... I will get new laptop tomorrow. Is there a way to make 1280x800 preset or can you give me a hint how to do it?

Thx

Saiker · #**1252** 08-29-2006, 05:45 AM

Dont know if this has been stated or something but thers an XP bar problem.
"0"'s dont show up and occaisionally if your xp is at 59%, it will show that you actualy have 69%

Thanks!

Ciar2001 · #**1253** 08-29-2006, 08:41 AM

Hi I did a fresh install of EQII yesterday along with this UI, when i logged into game i noticed that i have a mix of the original UI + the Profit one, i installed it to the place it said to do so, but it doesnt seem to have worked, is it worth removing the orignal game UI and replacing it totally?

basically deleting the default and replacing it with the files from Profit?

mother9987 · #**1254** 08-29-2006, 09:19 AM

Quote:

Originally Posted by Ciar2001

Hi I did a fresh install of EQII yesterday along with this UI, when i logged into game i noticed that i have a mix of the original UI + the Profit one, i installed it to the place it said to do so, but it doesnt seem to have worked, is it worth removing the orignal game UI and replacing it totally?

basically deleting the default and replacing it with the files from Profit?

If you're talking about removing the UI\default folder or files in it, that won't do anything. The game patcher makes sure that directory exists and has all the files in it every time it runs. Downloading the files from Sony if necessary.

If that's not what you're saying, sorry I misunderstood.

Ciar2001 · #**1255** 08-29-2006, 09:41 AM

Ahh ok, that explains it then what i did was stick the Profit UI over the top of the default folder, so i take it when i go to play the game it would repatch what i have ovewritten, makes much more sence.

sorry bit of a noob when it comes to UI's only ever used them in DAoC

ill give it another go tonight see if i have more luck.

Ciar2001 · #**1256** 08-30-2006, 01:40 AM

All fixed now, excellent UI ;-)

argo62 · #**1257** 08-31-2006, 01:32 AM

Hail,
anyone know if with the Profit there are problems with transfer character server to server, because after that the service is completed, I reboot Eq2 but my character there isn't.
Can it be th Profit the problem?

thanks
Argo

ps: excuse me for my english.

Tinilya · #**1258** 08-31-2006, 04:06 AM

Quote:

Originally Posted by argo62

Hail,
anyone know if with the Profit there are problems with transfer character server to server, because after that the service is completed, I reboot Eq2 but my character there isn't.
Can it be th Profit the problem?

If your characters aren't showing on Launchpad (where you see the patches downloading before you click on the Play button) then it's not the UI it's an SOE problem.

Until you select which character you want and click "Play" the UI isn't loaded.

sinislaw · #**1259** 08-31-2006, 05:41 AM

Quote:

Originally Posted by argo62

Hail,
anyone know if with the Profit there are problems with transfer character server to server, because after that the service is completed, I reboot Eq2 but my character there isn't.
Can it be th Profit the problem?

thanks
Argo

ps: excuse me for my english.

Is it possible that you moved between ywo regions (example form an US server, say Guk, to any EU server say Splitpaw) ?!? If so you will need to change the region form "english (us)" to "english (eu)" just before you press the 1st liecence agreement after launching the launchpad

seritia · #**1260** 08-31-2006, 05:48 AM

On the broker screen. in the preset dropdown menu the saguaro roots and figwart roots show up blank. you need to drop the 's' off the end of it to preset look for the product.

thanks

mben2006 · #**1261** 08-31-2006, 10:46 PM

Hello everyone,

I am a great fan of ProfitUI and EQ2 Maps. I am however having some problems

First off, I have downloaded the latest version of both UI programs. And I also have the Auto-Updating version of the EQ2 Maps, but it seems to not work for me for some reaosn. I have posted about this problem here. I will not go into major detail here, but I wil say this, once I do get the AU version of EQ2 Maps, I will need a walkrhrough on how to install this UI with EQ2 Maps so they both work properly.

So in conclusion, I need a walkthrough on how to install both the Manual Version of EQ2 Maps and ProfitUI Ii Reborn, a walkthrough on how uninstall the manual version of EQ2 Maps, and a walkthrough on how to install the Auto-Updating version of EQ2 Maps so ProfitUI II will work correctly.

Thanks,
Xaice Xi'Ting
Everfrost

[EDIT:] I have edited my post to express my concerns better.

Kemwen · #**1262** 09-01-2006, 03:03 PM

Has anyone been able to find a fix for the Raid Window crash that is generated from moving people around as raid leader?

It basically looks like this:

**Landiin** · #**1263** 09-01-2006, 04:58 PM

Quote:

Originally Posted by mben2006

Hello everyone,

I am a great fan of ProfitUI and EQ2 Maps. I am however having some problems

First off, I have downloaded the latest version of both UI programs. And I also have the Auto-Updating version of the EQ2 Maps, but it seems to not work for me for some reaosn. I have posted about this problem here. I will not go into major detail here, but I wil say this, once I do get the AU version of EQ2 Maps, I will need a walkrhrough on how to install this UI with EQ2 Maps so they both work properly.

So in conclusion, I need a walkthrough on how to install both the Manual Version of EQ2 Maps and ProfitUI Ii Reborn, a walkthrough on how uninstall the manual version of EQ2 Maps, and a walkthrough on how to install the Auto-Updating version of EQ2 Maps so ProfitUI II will work correctly.

Thanks,
Xaice Xi'Ting
Everfrost

[EDIT:] I have edited my post to express my concerns better.

Being gm9 is on vacation I'll answer you;

Just install Prophit like you normally would. Then run the EQ2MAP AU, Tell it where EQ2 is located on your hard drive and it'll put all the files in the correct place. ( ok it "should" put them there )

GeForceTony · #**1264** 09-01-2006, 05:31 PM

OK, I don't know if it's me or not... but, I've tried to reinstall the UI several times to see, and also tried to reinstall the game, but that doesn't work either (I go to extremes sometimes, LOL). Anyways, on the Persona Bar, where you click above your name to set AFK, LFG, LFW, and if in a group, Group Options. The problem is, you can't see what it is you're clicking on half the time till you click it. It's a minor annoyance, but in the Screenshot (for an older version) you can clearly see these labels. They do light up once you click them, but not being able to see them beforehand is kinda odd. I know all of them can be set by using chat commands (/afk, /lfw, /lfg, and /groupoptions) but I don't like having to do that if I don't have to.

Basically, was wondering if anyone can shed some light on this, and perhaps a fix or something can be done for it? Thanks in advance

!!!

---GFT

weeman0000 · #**1265** 09-02-2006, 07:07 AM

Is this LU26 compatible or will it be soon, because Eq2 wont load at all , even with the default UI skin

so... i dont know what to do. Tryed eXtreme UI but doesnt work :S, iv just installed EQ2 a few days afo after formating. Can someone help?

Hunnar · #**1266** 09-02-2006, 09:02 AM

Quote:

Originally Posted by Kemwen

Has anyone been able to find a fix for the Raid Window crash that is generated from moving people around as raid leader?

It basically looks like this:

This is from gm9 back on 8-21-2006, post #1212 .

Quote:

Originally Posted by gm9

Yes, the raid window problem is known (I guess I forgot to list it in the known issues section), but I haven't been able to track down the cause. I'll try to completely recreate the window hoping that fixes is.

In the meantime if you are a raid leader just delete the eq2ui_mainhud_raid.xml from the ProfitUI directory. If you are not leading raids or not moving people around just keep the current window.

Nitrius · #**1267** 09-03-2006, 02:04 PM

any words on when gm9 will be back?

stevus · #**1268** 09-03-2006, 04:50 PM

Hi,
There appears to be a bug in the Raid window.
Whenever you attempt to drag raid members between groups it seems to cause a complete game crash.
This has happended several times to me recently and to our guild raid leader who uses reborn as well.
Those using the default Ui appear to have no problems.

cheers
Grimheart
Runnyeye

PS I do think this UI is excellent btw.

Hunnar · #**1269** 09-03-2006, 07:24 PM

Quote:

Originally Posted by ToxicMan

any words on when gm9 will be back?

He should be back in about a week or so. He's taking a much needed vacation.

Hunnar · #**1270** 09-03-2006, 07:27 PM

Quote:

Originally Posted by stevus

Hi,
There appears to be a bug in the Raid window.
Whenever you attempt to drag raid members between groups it seems to cause a complete game crash.
This has happended several times to me recently and to our guild raid leader who uses reborn as well.
Those using the default Ui appear to have no problems.

cheers
Grimheart
Runnyeye

PS I do think this UI is excellent btw.

Check out the post two above yours

. You will see a response to Kemwen regarding this problem.

Warpspeed · #**1271** 09-04-2006, 11:47 AM

well guys, everytime i start my game...i find about 8 Chat windows all over the screen. I delete ´em all and /save_uisettings. Next time i start the game i got the same problem...any idea ?

Warpspeed lvl 70 Warlock, Member of Feral Fires on Valor

Visuo · #**1272** 09-04-2006, 04:02 PM

I want to kill the text please.

Great UI, and i searched forums for how to kil the text, didnt see it, sorry if i missed a post about it

Kemwen · #**1273** 09-04-2006, 07:18 PM

Yeah, I saw gm9's reply from the other page..I was wondering if he, or anyone else, had come across a fix is all.

Tinilya · #**1274** 09-05-2006, 03:01 AM

Quote:

Originally Posted by Visuo

I want to kill the text please.

Great UI, and i searched forums for how to kil the text, didnt see it, sorry if i missed a post about it

The text on the hotbars can be turned off using the Frame and Title Opacity sliders in the window settings for each hotbar ... hope that's what you meant

Hannadog · #**1275** 09-05-2006, 08:04 AM

Great UI!

I was wondering if anyone has a suggestion how to prevent or make it more difficult to accidently change the hotbar when clicking on the leftmost button. I try to click on the right side of that button to prevent changing hotbars, but sometimes my aim is not good.

Thanks in advance