Progress on Auto Updater - Page 4

Quib · #76 02-28-2005, 08:44 PM

That is indeed the problem. We'll need to repopulate the POIs for those zones. Anyone can help with that; just stop by maps.eq2interface.com and submit POIs as you're wandering around.

Quib

Humudce · #77 02-28-2005, 09:00 PM

Do we need Zonerects for those game supplied map zones still?

Quib · #78 02-28-2005, 11:05 PM

Thanks a ton for the data. My calculations were a bit off, but since you posted complete screenshots I can just reenter the values you gathered to get more accurate zonerects. Will update my XML in the other post in a minute or two. Don't worry about recalculating those zones; your data is good.

Quib

Eloa · #79 02-28-2005, 11:08 PM

Tigger, Get me one good location with coords to punch in to check it. I've got some but dont know how accurate the /locs are on them. If they are accurate, its not quite right, but close and I can fix. Give me like a nice defined zone marker that you can pick out easily where its supposed to be.

Thanks

Eloa · #80 02-28-2005, 11:10 PM

Ok, quibby beat me to it. Still if you have a couple points readily available itll help.

Tiggerdruid · #81 02-28-2005, 11:14 PM

Zarvon's tower:

906.73, -43.67, -517.40

that is loc as you walk in front door and run into pillar shows as dead center of tower on map. Does that help?

(*by the way in game now if you need more info*)

Freeport Griffon tower, top. Center.

-597.64, -33.76, -763.40

Deathbane27 · #82 03-01-2005, 12:09 AM

Quote:

Originally Posted by Tiggerdruid

Zarvon's tower:

906.73, -43.67, -517.40

that is loc as you walk in front door and run into pillar shows as dead center of tower on map. Does that help?

(*by the way in game now if you need more info*)

Freeport Griffon tower, top. Center.

-597.64, -33.76, -763.40

You can enter the info directly into the database yourself here:

http://maps.eq2interface.com/submitpoi.php

Tiggerdruid · #83 03-01-2005, 12:19 AM

oh hehe i thought she wanted it to check on her calculations to make sure she had zone rectangle correct. hehe my mistake.

Deathbane27 · #84 03-01-2005, 12:23 AM

Eep, that too. Me dumb.

taco-man · #85 03-01-2005, 11:27 PM

quib, i have been working on a way for you to upload the files that have to be done manually (like the images and eq2ui_mainhud.xml) and i am basicly done with the uploading part, i just have to make it do an xml file for my updater to read and then make the updater read it. not sure when i will do this because i am still really short on time right now, and i didnt study enough over the weekend so i bombed my calc test on monday

Quib · #86 03-02-2005, 01:33 AM

Quote:

Originally Posted by taco-man

...and i didnt study enough over the weekend so i bombed my calc test on monday

Noooo! taco-man, don't let this hurt your grades! (Imagine a big mother hen with "Quib" spray-painted on their side waggling a finger at you... erm, or a feather? I guess "EQ2" with a no-sign could be spray-painted on the other side, probably in red. Oh and then after that it says "until you've done your homework and studied." I'm not sure where there's room left on this chicken but... wait, what was your post about?)

The rest sounds awesome! I was gonna ask Eloa how I'd go about updating the Stormhold III map, but I guess it won't be an issue soon.

Definately don't feel rushed; I think I originally said the next official release would be "within the next week" like 5 weeks ago and have only released beta and dev versions. I'm touching up Nektropos's auto-load values tonight and then gotta make sure proper credit is in the readme's for everything (oi, that's gonna be a bictha). So, and I mean this, there should be an official release really "soon" and not "Blizzard soon" more like in a day or two.

Quib

taco-man · #87 03-03-2005, 01:47 AM

i just thought i would add that i added a spot for html update notes as you can see in the picture below, you will have to ignore the background, i havent resized it yet. the update notes will look better formatted and stuff i just made that page real quick

ger · #88 03-03-2005, 08:01 AM

Mmmm, pie.

taco-man · #89 03-03-2005, 06:55 PM

Quote:

Originally Posted by ger

Mmmm, pie.

I agree.

To Quib:
On a more serious note, i should have the part for you to upload manual stuff like images and that sort of thing finished by saturday. What i need to know from you to make sure i have everything covered.

The name you want to have to describe each type of file. The directory the files of that type will be going in on the CLIENTS machine. The file extension that type is.

Here would be an example:
Map Images | /images/maps | .dds

The way it will work for you once its up:
you will choose the type of thing you want to upload and how many of them you have to upload. You hit submit, then it goes to the next page and has however many browse boxes you need for the amount of files you told it you need to upload. You hit upload and it will tell you for each if file upload suceeded or failed, its md5 and wether it was an update, or a new file. The only reason i ask the extension is to try and prevent accidentally uploading the wrong type into the wrong spot (ie putting an xml file in the images)

taco-man · #90 03-03-2005, 11:51 PM

heres a new screenshot, i fixed the backrgound and i made it so that it shows the new files in a seperate window from the updated files since there is more room now in the window and i thought it might be nice to know when there is new stuff added or when its just an update.

Quib · #91 03-04-2005, 01:07 AM

Quote:

Originally Posted by taco-man

The name you want to have to describe each type of file. The directory the files of that type will be going in on the CLIENTS machine. The file extension that type is.

Here would be an example:
Map Images | /images/maps | .dds

Alrighty:
Map Images | \CustomUI\images\maps | map_*.dds (use checksum, if checksum takes too long, thoughrough file check can be turned off)

Icon Images | \CustomUI\images\icons | icon_*.dds (this type should be a present/not present check, users can mod these files)

Icon Page XML Files | \CustomUI\eq2map | icons_*.xml (auto-generated)

Image Page XML Files | \CustomUI\eq2map | image_*.xml (this type should be a present/not present check, users can mod these files)

"Under" Icon Page XML Files | \CustomUI\eq2map | under_*.xml (these are icon pages that are done by hand and not auto-generated; these should auto-update and use a checksum)

Style Set XML Files | \CustomUI\eq2map | window_*.xml (this type should be a present/not present check, users can mod these files)

Zone Connection XML Files | \CustomUI\eq2map | zones_*.xml (this type should be a present/not present check, users can mod these files)

Parent XML File | \CustomUI | eq2ui_mainhud_map.xml (use checksum, modified by hand)

I suggest checksum comparison be used for all XML files that aren't present/not present regardless of thourough file check's checkbox state.

If any of that doesn't make sense, yell at me. I'm positive I got every "type" of files there is. Sorry that I broke the different XMLs up into so many groups.

Quib

taco-man · #92 03-04-2005, 01:21 AM

Quote:

Originally Posted by Quib

If any of that doesn't make sense, yell at me. I'm positive I got every "type" of files there is. Sorry that I broke the different XMLs up into so many groups.

Not a problem at all, i wanted to make it as easy as i could for you (or other admis) to submit the new files and having the different types was the best way i could think of, if you have a different idea then let me know i am definately open.

Quib · #93 03-04-2005, 02:55 AM

Sounds like a good system to me. Accepting multiple files at once is wonderful; I was all ready to upload a single file at a time.

I have some other ideas for down the line invloving the website generating eq2ui_mainhud_map.xml so the icon page <include>s, MapStyles, etc. are all pulled from the database. This is something that'd happen like a month or two down the line though. It'll take at least a month to be 100% sure this system is as awesome as we think it is. A mapper would only have to upload a map_*.dds, the map's name and zonerect and the website would do the rest of the work. It'd make getting new maps into the system even easier than it's gonna be (I'll simply have to add the entries to eq2ui_mainhud_map.xml by hand then upload it). Just some food for thought.

Quib

taco-man · #94 03-04-2005, 11:39 PM

check the admin control panel on maps.eq2interface.com now quib. you should see the spot to upload files. once you get them all uploaded let me know

i will post the new version of the updater for you (and others) to test.

Quib · #95 03-05-2005, 03:39 AM

Neato! I'll have them all updated tomorrow. I decided to redo the DDS file naming conventions to be map_internalzonename.dds (right now they're pretty non-uniform). After I get that organzied I'll get them all in place.

Quib

Quib · #96 03-05-2005, 05:37 PM

Ok, all files have been manually uploaded.

Quib

Eloa · #97 03-05-2005, 05:45 PM

Get on AIM!

Eloa · #98 03-05-2005, 06:10 PM

Any of you other guys that have helped out a lot, arny, zonx, ger, and anyone else I may be forgetting, send me your AIM name and you can get in on these group chats we have about the site. We need everyones input.

taco-man · #99 03-06-2005, 12:58 AM

once i get the auto updater working and everyone seems to be doing ok i may call it quits for a while, but im sure i will be back eventually.

Killarny · #**100** 03-06-2005, 01:28 PM

aww, we'll miss you, taco-man!