eXtremeUI

[Landiin]

Originally Posted by Nerf_Herder

the new knowledge bars are great!! thanks - now I can craft to my hearts content...

the bags annoyed me first go so I used the default ones (luckily i had a backup of servername_charname_etc). As with the funky map problem, i've been updating the main map thingy and it works fine.... as long as i don't minimise it (which i don't). And I found another spelling error in the UI somewhere - i'll let you know where it is when i find it again - other than that, keep up the good work - this is an AWESOME UI.

Just tested the map and I was able to show the mini map, changes sized of the big map, minimize the and maximize the big map just fine.. Maybe try deleting the extremui folder and reinstalling /shrug

[Landiin]

Originally Posted by kramer

The other problem that I had is, I used the 1600 configuration settings that you had in the folder and that is what the screen looked like.. I could never get it set correctly.

What prob are you having with the included (1600xXXXX)ui_settings file? It should all fall into place no matter what the higth of the rez.

[heidrickla]

I think what he's talking about is when I first loaded the 1600x reso there was about a half inch gap between the hotbars and the player/grp window. There was about the same gap between the casting bar/grp window and the bottom left chat window. There was also about a 3/4 inch gap between the upper chat box and the compass window. The target bar was off a bit and the center hotbar wasnt touching the casting bar or player window which show'd a small gap between each. The effects window had to be adjusted a tad as well. This may have been limited to just me but it was easy to fix. Also the HO bar was mia for a couple days till I noticed it was hanging out over the quest helper. On a side note... I was wondering if it would be possible to make the merchant window and tracking window horizontally adjustable in next update. They are a bit bulky as is. Or maybe I could work on it if you have too much other stuff to mess with.

P.S. Not sure if mentioned elsewhere but the str tag is mispelled below the quest helper. ;D

[Nitrius]

Tried this UI ut with the 1280xxxx uisetting file, there was to black spoots on in the middel top and on to the far left side on the top, i could take my mouse over there and see tooltips to my experience and stuff but could't see any grapichs there, anyone know why?

[Landiin]

Originally Posted by heidrickla

I think what he's talking about is when I first loaded the 1600x reso there was about a half inch gap between the hotbars and the player/grp window. There was about the same gap between the casting bar/grp window and the bottom left chat window. There was also about a 3/4 inch gap between the upper chat box and the compass window. The target bar was off a bit and the center hotbar wasnt touching the casting bar or player window which show'd a small gap between each. The effects window had to be adjusted a tad as well. This may have been limited to just me but it was easy to fix. Also the HO bar was mia for a couple days till I noticed it was hanging out over the quest helper. On a side note... I was wondering if it would be possible to make the merchant window and tracking window horizontally adjustable in next update. They are a bit bulky as is. Or maybe I could work on it if you have too much other stuff to mess with.

P.S. Not sure if mentioned elsewhere but the str tag is mispelled below the quest helper. ;D

Oh kk.. Hmm

LoL The HO window I always hated that thing popping up in my view area, it seemed like no matter where I put it there was always something under it I needed to click on, be it a mob or other. I was tweaking some window in the main hud one day and I drug the HO window out of the way and it just happen to land there. Out of the way and it fit just right, so I made its container look like part of the quest window and woohoo no longer in the view area

Hmm throught I redid the trackign window in the last patch where it was not so bulky and resizable.. Might just be in the one I havn't uped yet.

[Landiin]

Originally Posted by ToxicMan

Tried this UI ut with the 1280xxxx uisetting file, there was to black spoots on in the middel top and on to the far left side on the top, i could take my mouse over there and see tooltips to my experience and stuff but could't see any grapichs there, anyone know why?

You have the option on that hides windows out of the letter box area. You need to go into options and change it.. You will prob need to adjust the opacity to full also on that window.

[kramer]

Well that is probably my problem. I can only run 1600*1050 so everything is wacked out.

I am not going to jump to my death just to test something. It may be there, but it is behind all my bags.

[heidrickla]

As for the overflow window prob I tried it out on every reso and couldnt grab... Yes checked nearly pixel by pixel. Id just stick the darn thing down over the casting/breath bar and be done with it. The casting bar already has a tag saying your inventory is overflowing right there anyways.

[Landiin]

Originally Posted by kramer

Well that is probably my problem. I can only run 1600*1050 so everything is wacked out.

I am not going to jump to my death just to test something. It may be there, but it is behind all my bags.

I use 1600x1024 so there shouldn't be any issues. When you updated the old inventory prob didn't get over writen or somthing /shrug.

[Landiin]

Originally Posted by heidrickla

As for the overflow window prob I tried it out on every reso and couldnt grab... Yes checked nearly pixel by pixel. Id just stick the darn thing down over the casting/breath bar and be done with it. The casting bar already has a tag saying your inventory is overflowing right there anyways.

Can't it has to be in the inventory. That text in the cast bar, would normaly be a big arse text pop-up blocking your view area.

Shoot maybe I didn't get the new inventory window in the last update and thats why it works for me and not some of you. The good news is, I'm sending up a v1.12.1 in a sec, so if you still have this trouble I would suggest quit dieing lol j/k.. Let me know if its still behind the text.

[Nitrius]

Before you update the new version maybe you should retype str in the mod, its stands "sta" two times i can see on the pictures :P

[Landiin]

Update 1.12.1

===============

• Fixed the bag issue of not opening all the way. They now work correctly and I can sleep once again.
• Fixed all the pop-up windows so they keep their proper size and not EQ2’s size.
• Corrected found misspelled words.
• Unselected the third quest item in the quest helper window.
• Tons of miner fixes and tweaks, I can’t remember them all.

[Nitrius]

Just want to say that the UI is looking very nice, and it really nice that its getting updated so often

Keep the good work up!


Edit: "You are not authorized to view this file..." what dose that mean? i can't seem to see or download the new version yet...
Maybe its because of the "Update pending" thats what it say on my favorits on the control panel.

[heidrickla]

Originally Posted by Landiin

so if you still have this trouble I would suggest quit dieing lol j/k.. Let me know if its still behind the text.

Took me a couple minutes to figure out how to even get something into the overflow. I just went and harvested something with full bags. No sense in tossing yourself off a cliff lol.

[heidrickla]

Originally Posted by ToxicMan

Edit: "You are not authorized to view this file..." what dose that mean? i can't seem to see or download the new version yet...
Maybe its because of the "Update pending" thats what it say on my favorits on the control panel.

Just means they haven't approved it yet. Whats the link anyways? Looks like it was removed from Complete Sets while they approving it.

[heidrickla]

As far as the new patch goes if you use the 1600x ini and windows seem like they are stacked up go into options and adjust the widescreen letterbox it will move the windows that are stacked on eachother. And still having same overflow problem. Not sure what to tell ya. I don't really care bout it. I've never had to use it just trying to help ya troubleshoot it.

P.S. Like the wider zoning window Use to drive me nuts on raids when the instance part of the zone title was cut off

[omegaslover]

Ok, I hope some one can help me, ever since I began messing with my screen res rtying to find a good one for the game, I have noticed a blank spot on the side of my screen, Now I don't know if it was there before but I just recently noticed it. I believe there is something on my computer that lets me mess with it but I cant find it... Hmm maybe I should explain my problem more. On the left side Where usually the Start button is, there is a black spot then the start button. I tried to take a screenshot, but it left the black spot out, so I am thinking that I need to recenter it or something.. errr thats kind of confusing... nvm, if you understand this and can help me, please do, otherwise ignore my rambling lol

[heidrickla]

This problem not limited to extreme ui. First noticed it in Nedra then Steel Bottom. The vertical scroll bar for this ui which is originally from the nedra gothic theme seems to go mia when there are alot of lines it needs to scroll. Is it possible its a problem with the fetish_widgets1.dds from the goth theme? Was also wondering if the nedra parts in here are from classic or nightfall. Whenever ya get a chance.


Was tinkering around and figured out that the minimum thumb size was set too small in _fetishstyles.xml it is set to 17 currently I changed it to 21 and it seems to have fixed it. Let me know if this fix works for everyone else that was having this problem. It's on line 256.

Here is what it was:
<ScrollbarStyle Background.Normal="vscrollbar.vscrollbar_background" EndCap.Disabled="vscrollbar.vscrollbar_endcap_disabled" EndCap.Normal="vscrollbar.vscrollbar_endcap_normal" EndCap.Pressed="vscrollbar.vscrollbar_endcap_rollover" EndCap.StopOffset="18" Name="vscroll" StartCap.Disabled="vscrollbar.vscrollbar_startcap_disabled" StartCap.Normal="vscrollbar.vscrollbar_startcap_normal" StartCap.Pressed="vscrollbar.vscrollbar_startcap_rollover" Startcap.StopOffset="20" Thumb.Background.Normal="vscrollbar.vscrollbar_thumb_center" Thumb.EndCap.Normal="vscrollbar.vscrollbar_thumb_end" Thumb.MaxSize="1000" Thumb.MinSize="17" Thumb.StartCap.Normal="vscrollbar.vscrollbar_thumb_start"/>

And this is what I changed it to:
<ScrollbarStyle Background.Normal="vscrollbar.vscrollbar_background" EndCap.Disabled="vscrollbar.vscrollbar_endcap_disabled" EndCap.Normal="vscrollbar.vscrollbar_endcap_normal" EndCap.Pressed="vscrollbar.vscrollbar_endcap_rollover" EndCap.StopOffset="18" Name="vscroll" StartCap.Disabled="vscrollbar.vscrollbar_startcap_disabled" StartCap.Normal="vscrollbar.vscrollbar_startcap_normal" StartCap.Pressed="vscrollbar.vscrollbar_startcap_rollover" Startcap.StopOffset="20" Thumb.Background.Normal="vscrollbar.vscrollbar_thumb_center" Thumb.EndCap.Normal="vscrollbar.vscrollbar_thumb_end" Thumb.MaxSize="1000" Thumb.MinSize="21" Thumb.StartCap.Normal="vscrollbar.vscrollbar_thumb_start"/>

[DarkScales]

Somehow I lost the raid window in the upper right hand corner of the UI.

How do I get that back?

Thanks

[heidrickla]

Originally Posted by DarkScales

Somehow I lost the raid window in the upper right hand corner of the UI.

How do I get that back?

Thanks

Check the boxes by raid under the compass if it still doesn't show press Alt+R

[kramer]

Running the new version and this is what I still get using the 1280 version. Still not able to see overflow.

Suggestions???

[heidrickla]

In UI Builder Inventory/Inventory/GeneralPage/InvSlot6 set the Visible option to true. This will only show the icon when there is something in overflow. I did this a couple minutes ago and can now move stuff out of overflow. I also moved the InvSlot6 box to the far right of the Time_ZonePage and filled that top to bottom. The upper right corner of it was covered up by the bag switch button but it did not interfere with its function. I can post it as a patch or email it to you if you want Landiin.

[Landiin]

Originally Posted by heidrickla

In UI Builder Inventory/Inventory/GeneralPage/InvSlot6 set the Visible option to true. This will only show the icon when there is something in overflow. I did this a couple minutes ago and can now move stuff out of overflow. I also moved the InvSlot6 box to the far right of the Time_ZonePage and filled that top to bottom. The upper right corner of it was covered up by the bag switch button but it did not interfere with its function. I can post it as a patch or email it to you if you want Landiin.

Already fixed and 1.12.2 is being sent up. It seems if you have 1 thing over flow it will not light turn on the icon but if you have many things over flow it will. Thats the only thing I can see was going on becuase when I took all my item down to 0% and had about 5 items in the over flow it was on, but when I just harvested to I got the over flow to show the text showed but the icon didn't. So I just made then noramly on all the time. I had them off because they got in my way when I tweak on the inventory window lol.

[Landiin]

Update 1.12.2

===============

• Fixed the issue with the OverFlow slot not showing up.

[Landiin]

Originally Posted by kramer

Running the new version and this is what I still get using the 1280 version. Still not able to see overflow.

Suggestions???

Fixed in 1.12.2 and kramer sorry to tell you this but your eq2ui_settings files is bad. How do I know? Because your health bar's color isn't being filtered. It should be red/yellow/green not what it looks like now. I found that when the guages colors quit being filters the settings file has been bugged.