|
02-12-2005, 03:00 PM
|
EQ2MAP Webmaster
|
|
Join Date: Dec 2004
Server: Unkown
Posts: 496
|
|
[OLD] Troubleshooting. Thread
Before posting your problem, please read through the FAQ/Troubleshooting procedures at http://maps.eq2interface.com/index.php?ID=faq.
If you are using the updater please check the description (http://www.eq2interface.com/downloads/fileinfo.php?id=3509) for answers to your problem as well.
any posts asking a question in that is answered in the 2 links above will be deleted so please read them before posting.
Last edited by taco-man : 05-23-2005 at 09:32 AM.
|
02-13-2005, 04:35 PM
|
A Griffon
|
|
Join Date: Jan 2005
Posts: 720
|
|
EDIT:
The maps will be able to be fixed now. We can now make floors automatically load. This will happen in due time.
It's how it has to be done due to the z axis. we can't do a zonerect for each floor, so we (anyone who's set up a multi-floor map) get the zonerect of the first floor, then postition all the floors based on that zonerect. The ebst way (rather, the way where nothing would be cut off) would be to get the zonerect maximums from all floors and position all 3 layers based on that, but it's a LOT of work. We will likely revisit Blackburrow and The Caves in the future (I feel Stormhold is really good and acceptable as is, other than floor 3 needing refining).
Quib
Last edited by Quib : 02-24-2005 at 03:30 AM.
|
02-15-2005, 01:16 AM
|
|
a hedgehog
|
|
Join Date: Dec 2004
Server: Nagafen
Posts: 854
|
|
aye. To fix bb you get total zonerect. But you will probably have a smaller map of every floor, since you will have to squish everything into that smaller space
BB was my learning map i think i used someone else's zonerect...gry online or something
__________________
Nagafen (Evil) - Climax, Goshawk
Last edited by tonyis3l33t : 02-15-2005 at 01:33 AM.
|
02-20-2005, 02:45 PM
|
A Coastal Crab
|
|
Join Date: Feb 2005
Server: Antonia Bayle
Posts: 1
|
|
No map outline, just dots and arrows.
I have this problem where I don't get the actual map, just the colored dots and my placement maps. Please help...
LTB
|
02-21-2005, 11:33 AM
|
EQ2MAP Webmaster
|
|
Join Date: Dec 2004
Server: Unkown
Posts: 496
|
|
Quote:
Originally Posted by Letthebodies
I have this problem where I don't get the actual map, just the colored dots and my placement maps. Please help...
LTB
|
Please see first post in this thread. Very large red letters.
|
02-28-2005, 01:44 PM
|
He Who Holds the XML
|
|
Join Date: Nov 2004
Server: Nektulos
Posts: 75
|
|
in testing the auto-updater, it seems to work beautifully. there is just a couple graphics glitches I see:
1. black box around the update button
2. "AutoLaunch EQ2" doesn't fit in designated space.
image attached.
__________________
Aalwein | Bartolomeu
"Vae puto deus fio."
|
03-01-2005, 12:22 AM
|
|
aka Mook
|
|
Join Date: Jul 2004
Server: Nektulos
Posts: 1,451
|
|
Getting the following error when attempting to launch the updater:
"The application failed to initialize properly (0xc0000135). Click on OK to terminate the application."
Obviously it's because I need to update my .NET framework version (or whatever it uses, I need to update everything ), but just thought I'd drop a reminder to link to all that junk that the user should have up to date on the download page once it's ready for the public.
__________________
If it ain't broke, it needs more features!
|
03-01-2005, 04:48 PM
|
|
EQ2MAP Updater Author
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 1,349
|
|
Quote:
Originally Posted by aalwein
in testing the auto-updater, it seems to work beautifully. there is just a couple graphics glitches I see:
1. black box around the update button
2. "AutoLaunch EQ2" doesn't fit in designated space.
image attached.
|
what version of windows is that??? the box must be there from having an old version of windows because it works fine on XP. I can make the text area a little wider for that version of windows, but there is nothing i can do about the box.
|
03-01-2005, 05:17 PM
|
A Griffon
|
|
Join Date: Jan 2005
Posts: 720
|
|
The auto-updater looks and works fine on Win98SE and XP when using the classic theme also. So yeah, I'm curious which version of windows it is too.
Quib
|
04-02-2005, 08:54 AM
|
|
A Dervish Cutthroat
|
|
Join Date: Dec 2004
Server: Guk
Posts: 38
|
|
Quote:
Originally Posted by aalwein
in testing the auto-updater, it seems to work beautifully. there is just a couple graphics glitches I see:
1. black box around the update button
2. "AutoLaunch EQ2" doesn't fit in designated space.
|
I am having a similar problem with the display of the updater on one of my computers, it only shows 1/4 of the area and I cannot resize it to show the entire window as it seems to be locked in size.
I didn't get a pic of it but just imagine that only the top left area of the updater shows, the rest (3/4) is off the area of the updater window.
It looks fine on my PC but it is my laptop that has this issue, I run WinXP sp2 with all current updates on both.
Resolution on the laptop (Dell XPS) is 1920X1200 whereas the PC is running a resolution of 1280X1024, this is the only graphical difference that I can discern.
Simply allowing the window to be resizable would fix it for me, but I would really like to see the whole thing one way or the other =)
Thanks for the great work, I <3 this map program!!!
|
03-07-2005, 01:43 PM
|
A Brown Bear
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 11
|
|
Newest download caused 'Select Map' tab to poof
I recently updated my map files to the latest you have available. I see the colored dots, waypointing works, etc. However, I no longer have the 'Select Map' tab near the top of the window like I used to have. I have re-installed the files, deleted and re-installed the files, but still have the default 2 tabs and no map selection option. Is this correct?
If not, please suggest what I might try next. I think the files are in the correct locations since I have read and reread the instructions and checked everything. Sorry if I am just being dense!
|
03-07-2005, 02:04 PM
|
|
Steward of the Faithful
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 580
|
|
The select map tab has been replaced by autoloading icon overlays and height-based map changing. You aren't doing anything wrong.
__________________
|
03-08-2005, 05:54 PM
|
A Griffon
|
|
Join Date: Oct 2004
Posts: 101
|
|
Quib, I'm fairly certain it is setup that way. At least, there is no fog whatsoever on the map (not in corners or anywhere at all). The entirity of the Down Below map was visible, too, even in areas you could not get to. Unfortunately, I don't have a key to the zone and am unlikely to get one or go back anytime soon.
|
03-11-2005, 10:07 AM
|
|
Crushbone - Cronique
|
|
Join Date: Dec 2004
Server: Crushbone
Posts: 163
|
|
The wailing caves icon XML files no longer have any POI's since I started using the Updater.
|
03-11-2005, 10:57 AM
|
|
EQ2MAP Updater Author
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 1,349
|
|
that is because none have been submitted to wailing caves on the website. submit some and then they will show up when you use the updater. I appologize for not being able to get all the maps imported some of the maps were not in propper xml format so i had no way to parse them to get all the values for the points of interest.
|
03-15-2005, 10:07 AM
|
A Young Mystail Rat
|
|
Join Date: Mar 2005
Server: Antonia Bayle
Posts: 2
|
|
EQ Updater
Error Getting File List:
The underlying connection was closed: Unable to connect to the remote server.
I get this error every time i try to run eq update. Can anyone help me?
|
03-15-2005, 10:14 AM
|
|
EQ2MAP Updater Author
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 1,349
|
|
do you have a firewall? if you do its probably blocking the updater from connecting to the eq2map website. i think even windows xp service pack 2 has a firewall built into it. you have to tell your fire that it can access the internet.
|
03-15-2005, 08:43 PM
|
A Young Mystail Rat
|
|
Join Date: Mar 2005
Server: Antonia Bayle
Posts: 3
|
|
I downlowed your map updater, and was surprised of the detail in Nek Castle especially. That is a great map.
I do however, have a slight problem...there is no Lavastorm map and I can't seem to get my old maps to come up, even after removing the updater. I apologise up front, but I am not good with UI stuff.
Could you please point me in the direction of information on restoring my default maps so I can venture into Lavastorm, and maybe send in my map when it is reveiled.
Thank you.
|
03-15-2005, 09:06 PM
|
|
EQ2MAP Updater Author
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 1,349
|
|
is lavastorm one of the zones they added in the expansion? and to remove it you would have to go to your custom ui folder that it installed things in and delete all the files that it added. If this was your first ui and you didnt have a custom ui folder than just delete everything in the EQ2MAP folder under the ui directory of the eq2 directory.
|
03-16-2005, 12:26 AM
|
A Young Mystail Rat
|
|
Join Date: Mar 2005
Server: Antonia Bayle
Posts: 3
|
|
Thank you for your reply, I will try to delete the file until you have that map available.
Lavastorm is a zone accessed from EL and is auto-accessed at 42. I don't know about the access quest, but it was there prior to the expansion.
|
03-20-2005, 02:17 PM
|
A Young Mystail Rat
|
|
Join Date: Mar 2005
Server: Antonia Bayle
Posts: 6
|
|
Error
Getting this error:
The remote server returned an error: (404) Not Found.
File: runnyeye.dds
|
04-11-2005, 04:45 AM
|
A Young Mystail Rat
|
|
Join Date: Apr 2005
Server: Antonia Bayle
Posts: 2
|
|
i feel that the "glowing trail" got bugged when i innstaled EQ2map...!
|
05-03-2005, 04:43 AM
|
A Young Mystail Rat
|
|
Join Date: Nov 2004
Server: Antonia Bayle
Posts: 2
|
|
framework initialization error
get message C:\windows\microsoft.net\framework\v1.1.4322.dll could not be loaded Is this something to do with windows service pak. im lost here
|
05-06-2005, 04:23 PM
|
A Coastal Crab
|
|
Join Date: May 2005
Server: Antonia Bayle
Posts: 1
|
|
.dds files wont update
I deleted my .dds files to check and see if there were any updates for them and the updater wont download any of them
|
05-14-2005, 04:38 AM
|
|
A Griffon
|
|
Join Date: Apr 2005
Server: Splitpaw
Posts: 151
|
|
First I would like to say GREAT work guys, since I found this ALL My friends is using it..
Only have 1 problem with it, been allopver the troubbleshooting to find something about it but no luck, so I try it here instead..
Sometime the map show me Zones I'm not in, FX, I take the bird from Freeport Station (CL) to Nectulus Station (CL), the entire CL map is split up in two, and when I come to the place where it changes it works just fine, but if I remove the map and takes it up again, it will show me the side I just came from and not the one I'm in...
Been trying to figure this out myself, but the problem is that its only sometimes it does this, anyone else has this prob ??
Thnx..
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 03:57 PM.
|
|