joyCrazy

Thank You I'll try that . I love this ui.

Knubbel

I started today with using darqui and i like it so far but i have one problem and a question.
1) When i go into the persona window and press the horse or currency symbol no mount or currency is displayed in the window. When i go back to my old window nothing can be seen then too. I have to zone to see the currency or mounts.
Any solution for this little bug?
2) When i open the clock window there is the timer right next to the clock. I can only set the timer to max 41. Is there a reason for this max value?

Darqwood

Hi Knubbel,

1) I have not heard this reported before, so it may be a problem caused by today's SOE patch. If I can reproduce the issue I'll patch the persona window asap. The code for the currency and mount tabs is unchanged from the default.

2) The countdown timer can be set to higher values if you stretch it out more. At full width you can count down several minutes.

__

Knubbel

Thanks for your answer.

To 1) I did a bit more testing on my side and I seems to have the same problem when i log into darqui and then change to my old ui. So it does not seems to be a problem of darqui itself. Nevertheless when i zone all the currency and mounts are back. And when i log in with darqui then its all ok too. Seems only to happen when i switch the ui. So not a big problem. I simply will set darqui as default

kamcheu

I want to try your UI. It looks fantastic. However I can't get it to work. Profit, Fetish, and Drums work fine.

When I browse to my UI folder and click make default I get the error messge "The eq2.ini file was not found or could not be created in the specified location. is the game folder named correctly."

What am I doing wrong? I have it installed in a custom directory.

Darqwood

What is the file path to your custom UI folder?

LittleMagica

Okay...i have a Problem...
When i Cure with my Warden then the UI tells the Groupmembers...how can i disable that?
In the Config Utility isnt any Text by Tell Command...the field is empty...why does it tell?

Darqwood

In the utility click the GroupMembers tab, then click the Priest tab. The extra tells can be cleared there.

LittleMagica

Aahh...thx have found it

inz0mn1ak

I just wanted to say that this UI is awesome, like this much better than any UI I've used including profit.

Thanks for keeping this updated

kamcheu

C:\EQ\EverQuest II\UI

Poopie_master

Getting

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at DarqUI.Form1.Quick_Start()
at DarqUI.Form1.QSButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


When I try to quick setup
Updated all my .net too

Darqwood

Poopie_master, can you send me the entire error? If it's too long for this thread you can send it to darqwood at hotmail dot com. Thanks.

Poopie_master

See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at DarqUI.Form1.Quick_Start()
at DarqUI.Form1.QSButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4214 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
DarqUI Window Utility
Assembly Version: 2.2.1.4
Win32 Version: 2.2.1.4
CodeBase: file:///C:/Users/Patrick/Downloads/DarqUIWindowUtility2214/DarqUI%20Window%20Utility.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4215 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4214 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
----------------------------------------
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
----------------------------------------
System.Xml.Linq
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.1 built by: SP
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml.Linq/3.5.0.0__b77a5c561934e089/System.Xml.Linq.dll
----------------------------------------
System.Core
Assembly Version: 3.5.0.0
Win32 Version: 3.5.30729.1 built by: SP
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Core/3.5.0.0__b77a5c561934e089/System.Core.dll
----------------------------------------
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4016 (NetFxQFE.050727-4000)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
----------------------------------------

************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.

For example:

<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>

When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.

Darqwood

[quote]Originally posted by Poopie_master
[b]See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.

************** Exception Text **************
System.IndexOutOfRangeException: Index was outside the bounds of the array.
at DarqUI.Form1.Quick_Start()
at DarqUI.Form1.QSButton_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)


************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4214 (VistaSP2GDR.050727-4200)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework64/v2.0.50727/mscorlib.dll
----------------------------------------
DarqUI Window Utility
Assembly Version: 2.2.1.4
Win32 Version: 2.2.1.4
CodeBase: file:///C:/Users/Patrick/Downloads/DarqUIWindowUtility2214/DarqUI%20Window%20Utility.exe
----------------------------------------
...


Can I get you to download the newest version of the utility and try that -- I notice you're using an older version which has a slightly different way of mapping the character information. Thanks, and sorry you're having trouble with Quick Setup.

__