Hotbar spinner issues
 

A couple strange things are going on with my hotbar spinners. The first one is that the spinners are very tricky to mouse over and click if im trying to change the hotbar. If I am moused directly over the spinner it blinks rapidly and almost acts as if click through is enabled making it very difficult to cycle through the hotbars. The second is that if I apply the setting show spinner to the hotbar it will appear until I mouse over it and will then disappear and the setting will have changed back to being unchecked.
Thanks for any help

The first issue has been reported and I will look into it, thanks.

The second issue is solved by setting the hotbar to "frame only" mode, as explained in the FAQ. This is also a likely workaround for the first issue, but I can't say for sure before I get to test it.

yea, setting it to frame-only and show spinner in hotbar options does the trick for now.

Thanks for the replies, I think I misread the FAQ and set it to none instead of frame only. That did clear the major problems up, Thanks again. The frame only and show spinner seems to be the workaround for the first issue also.