EQ2Interface

EQ2Interface (https://www.eq2interface.com/forums/index.php)
-   EQ2MAP New maps (https://www.eq2interface.com/forums/forumdisplay.php?f=40)
-   -   [Map] The Summoning Chamber (https://www.eq2interface.com/forums/showthread.php?t=6502)

Sereny 07-21-2006 07:43 PM

[Map] The Summoning Chamber
 
1 Attachment(s)
First time poster. Please let me know if anything can be improved.

qey_south+qey_ph_3r02.iop

diztorded 10-08-2006 10:30 AM

I took a look at your log and I am sorry to say it is unusable. To make a map, we use the points you record to make lines. To make a line, we draw a line between two points. More points gives us more lines.

1153528360)[Fri Jul 21 20:32:40 2006] Your location is 7.25, 5.00, -1.23. Your orientation is 358.02, 0.00, 0.00
(1153528382)[Fri Jul 21 20:33:02 2006] \aPC 281346 Osgoliath:Osgoliath\/a start new map line
(1153528388)[Fri Jul 21 20:33:08 2006] Your location is -4.25, 4.73, -9.75. Your orientation is 74.78, 0.00, 0.00
(1153528432)[Fri Jul 21 20:33:52 2006] \aPC 281346 Osgoliath:Osgoliath\/a start new map line
(1153528438)[Fri Jul 21 20:33:58 2006] Your location is -9.51, -2.00, -1.86. Your orientation is 344.11, 0.00, 0.00
(1153528454)[Fri Jul 21 20:34:14 2006] \aPC 281346 Osgoliath:Osgoliath\/a start new map line

As you see here, we have one point then a new map line then another point. We cannot connect those points together. Also, there is only three points which do not come together.

A good rule is to start at one door frame. Do a New Map Line. Walk to the first bend in the wall and mark you possition. Go to the next bend and mark it again. Keep doing that till you reach a break (start a new map line) or and up where you started.

Good luck and happy mapping.


All times are GMT -5. The time now is 02:08 PM.

vBulletin® - Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
© MMOUI