EQ2Interface - [added] Crystal Caverns: Collapse

EQ2Interface (https://www.eq2interface.com/forums/index.php)

- EQ2MAP New maps (https://www.eq2interface.com/forums/forumdisplay.php?f=40)

- - [added] Crystal Caverns: Collapse (https://www.eq2interface.com/forums/showthread.php?t=15703)

cooldeath

05-31-2011 04:28 PM

[added] Crystal Caverns: Collapse

2 Attachment(s)

Here is the code to allow Crystal Caverns to have it's own map page, as it seems to currently be using the crystalline breaks map with POI's. I have not yet explored the entire zone to ensure it has no extra spots. If it does, I will release a new image for it.

~Xeblikaa of Crushbone

*edit*

Map complete and tested good. Also note that some POI's for this zone were submitted under Crystalline Breaks.

Code:

<ImageStyle Name="exp07_dun_crystalcavern_heroic" displayname="Crystal Caverns: Collapse" menugroup="Velious" zonerect="-228, -195, 174, 270" >

<ImageFrame Source="images/maps/map_exp07_dun_crystalcavern_heroic.dds" SourceRect="0,0,436,506" />

</ImageStyle>

Drumstix42

05-31-2011 04:44 PM

It's pretty close. When you go down the hall to port to the final spider, it breaks off to the east side, and then you go to what appears to be either below or above the normal zone area.

cooldeath

05-31-2011 04:59 PM

Ok thanks for the info, once I run through it I'll determine how easy and/or needed a modification would be.

*edit*

after running the zone there is a significant part missing off the right side. I will release a new image for the new zone when I can.

cooldeath

06-02-2011 06:34 PM

New map uploaded to first post.

gm9	06-02-2011 07:26 PM

You are fast. Added. Those POIs will have to be fixed/resubmitted manually.

cooldeath

06-02-2011 07:36 PM

It's way easy when I already had all the info from the Crystalline Breaks map, all i had to do was add the missing parts, get the max extents of the map, then just overlay the Crystalline breaks map over it and touch it up. :)

All times are GMT -5. The time now is 09:06 PM.