EQ2Interface

EQ2Interface (https://www.eq2interface.com/forums/index.php)
-   DarqUI (https://www.eq2interface.com/forums/forumdisplay.php?f=48)
-   -   Missing Click to Cure Buttons for DarqUI (https://www.eq2interface.com/forums/showthread.php?t=14024)

flutieflakes 03-25-2010 06:40 PM

Missing Click to Cure Buttons for DarqUI
 
Hi. I installed DarqUi today for both my group and raid windows and they seem to work fine with the utility to make the bars and whatnot. The only problem I'm having is that the row of spaces where the click to cure icons should be are empty and I can't click to cure anything. I don't know if that is by design since I haven't tried it in actual combat, but I'm wondering if they shouldn't be there even when the group I'm in is just waiting around and I should be able to cast even though we're just waiting around? Any ideas what's up with this. I VERY carefully installed these mods and followed the directions in the README.TXT and the GroupRaidHelp.html webpage as well.

MarkSam 01-20-2019 02:22 PM

Try clicking on the blue gem for the Group window (DarqUI settings), then go to the Settings tab. Change the 'Layout Mode' to something different, then set it back to the one you want. This should reset all the buttons. It will also show you where the buttons are, since they can be in several different arrangements.

If you created a custom layout, I have no idea. You could try moving the cure blocks, saving it, then moving them back and saving again.

Just don't click the Other tab - there's nothing there, and all the tabs disappear when you do. The dropdown appears at the top, but Group isn't listed. If you hit Other, and you aren't finished, you'll have to close the Settings window and use your Group window to re-open it.


All times are GMT -5. The time now is 03:18 AM.

vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© MMOUI