EQ2Interface

EQ2Interface (https://www.eq2interface.com/forums/index.php)
-   EQ2MAP (https://www.eq2interface.com/forums/forumdisplay.php?f=34)
-   -   Stormhold 3 and 4 (4 is brand new!!!) (https://www.eq2interface.com/forums/showthread.php?t=1515)

sunthas 02-18-2005 11:18 AM

Stormhold 3 and 4 (4 is brand new!!!)
 
Stormhold is going to be a problem now. I mapped out the 4th floor (attached) but the 4th floor sticks out further west than the maelstrom room does on the 2nd floor.

Also the 3rd floor is stretched east and west too far, I include more information later to help us fix that floor.

Here is the 4th floor.

sunthas 02-18-2005 11:49 AM

2-3-4
 
Here is the problem with the 4th floor and how it lines up with the 2nd and 3rd.

I had to really compress the 3rd floor to get it to match up with the other 2. I'll show some screenshots of the 3rd floor and see if I can show how it should line up with stormhold2.dds so its easy to fix.

sunthas 02-18-2005 11:58 AM

Stormhold3 Stretch
 
This shows an example of the problem with stormhold3, this is probably due to the way I posted the file orginally. Would it help if I posted these with the Loc grid?

Quib 02-18-2005 12:01 PM

Quote:

Originally Posted by sunthas
This shows an example of the problem with stormhold3, this is probably due to the way I posted the file orginally. Would it help if I posted these with the Loc grid?

Hm, it definately wouldn't hurt. I had misunderstood the layout of floor 3 when I was getting it in-game, but even just the 1 pic you posted already (with the orange X) will make it way easier to fix.

I have a couple crazy ideas to test (gonna see if I can change zonerect on the fly using a button) to get floor 4 working without having to redo 1, 2 or 3. Could you get the approximate zonerect values for just the 4th floor?

Quib

sunthas 02-18-2005 12:19 PM

Quote:

Originally Posted by Quib
Hm, it definately wouldn't hurt. I had misunderstood the layout of floor 3 when I was getting it in-game, but even just the 1 pic you posted already (with the orange X) will make it way easier to fix.

I have a couple crazy ideas to test (gonna see if I can change zonerect on the fly using a button) to get floor 4 working without having to redo 1, 2 or 3. Could you get the approximate zonerect values for just the 4th floor?

Quib

ZONERECT -167.05 -152.68 -25.75 63.14

sunthas 02-18-2005 12:23 PM

couple more info points for 3rd floor stretch.

You can see that its in the right spot, it is just stretched too far.

sunthas 02-18-2005 01:15 PM

I love that technique zonx was using on Nek Castle.

Quib 02-18-2005 09:41 PM

In light of new information revealed by the wonderful Mr. Bobble in this thread http://www.eq2interface.com/forums/s...ead.php?t=1485 doing floor 4 will be cake. Also, it's gonna take me like half a week to redo all the multi-floor maps to automatically switch floors.

This is good news though. :D

Quib

sunthas 02-20-2005 01:31 AM

Awesome!!!!

I'll be gone for a week, might hit the internet a few times while I'm gone but wont have access to eq2. =) Have a good week all =)

aalwein 02-20-2005 02:09 AM

go quib! this is such an invaluable tool. just wait until SOE recruits you to do this officially and *gasp* for a paycheck!

Humudce 02-20-2005 03:07 AM

Have a good week off Sunthas, and the news sounds awesome Quib.

Quib 02-20-2005 07:01 PM

1 Attachment(s)
This is an experimental version of Stormhold using the new height filter values. Only grab this if you wanna help troubleshoot; it may not even let EQ2 load for you if you don't have the proper version of the map files. An official release is on it's way soon to get all the loose ends tied up.

Quib


All times are GMT -5. The time now is 07:33 AM.

vBulletin® - Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
© MMOUI