Default Old
Created by Drakah
Version 4.6 - April 29, 2016
Folder Name: drakah_default_old_eqii
shakahr.com


Introduction:
*** ALWAYS use a fresh installation of an interface!

This UI simulates the UI I created for EQ1 and was made for a resolution of 1680 x 1050.
If you are not using the same resolution, then you will need to adjust the windows accordingly, hopefully to a silimar setup I have via the screenshot. Some windows may be hard to move, but it is possible. If you cannot move the window, make sure the window is Unlocked. as well as the Click-threw option would pose a problem to move things.

To Install:

1) Go to EverQuest II\UI folder
2) You should see 3 folders - Default, Default_Blue and fonts
3) Extract the Zip file to EverQuest II\UI
4) You should now have 4 folders - Default, Default_Blue, fonts, and drakah_default_old_eqii
5) Double-click the drakah_default_old_eqii folder, and you should see a whole bunch of files and 1 folder. If you see another drakah_default_old_eqii folder, then you extracted it wrong....just cut and paste the folder back one notch.
6) Copy the EQ2.ini file, from the UI folder, to the EverQuest II root directory.
7) Install/Launch EQ2MAP Updater, and it should patch your UI folder accordingly once your have the settings correctly established.

Note:
If you have an issue loading the UI, you can try editing the eq2_recent.ini file and look for:
cl_ui_skinname

it should say:
cl_ui_skinname drakah_default_old_eqii