Coordinates

Similac · #1 03-10-2006, 05:59 AM

The waypoints in EQII are listed as 3 sets of numbers, but for a lot of areas stuff is referred to as only two sets. how do the two relate? If it's listed as say... 35,35 how do I find that using the 3 number system?

**Landiin** · #2 03-10-2006, 08:34 AM

when only two numbers are listed they are leaving out the Z axis. So just look at the two numbers as your X and Y and don't worry about Z.

You can't use the /waypoint command with just 2 numbers though, so if you try to waypoint to a place with just 2 numbers, set Z to 0 or what ever.

DBurgdorf · #3 03-10-2006, 08:51 AM

Quote:

Originally Posted by Similac

If it's listed as say... 35,35 how do I find that using the 3 number system?

To clarify just a bit more, the "Z" axis (reflecting vertical height) is the *middle* number. So if you see a loc listed as "35, 35" and want to set a waypoint, set it to "35, 0, 35" and you'll be fine.

-- Darryl (Milquetowst)

Similac · #4 03-10-2006, 01:57 PM

Will do. Thank you guys very much.