EQ2Interface - [added] 4 Room Apt V3

EQ2Interface (https://www.eq2interface.com/forums/index.php)

- EQ2MAP New maps (https://www.eq2interface.com/forums/forumdisplay.php?f=40)

- - [added] 4 Room Apt V3 (https://www.eq2interface.com/forums/showthread.php?t=14057)

[added] 4 Room Apt V3

I got tired of zoning in my alts apartment and seeing the map creation tutorial button so I made my first map.

This map is of the four room apartment version 3 in South Qeynos.

My guild is Radiance and I play on the Oasis server.

My main Char. is Sirveyor

I followed the tutorial and after some frustrating "Why ain't it working right" moments I think I got it. The tutorial is on point and very helpful, I just over looked some important steps my first few tries.

So I submit to you for your review the following:

Code:

<ImageStyle Name="qey_ph_3r03_0" displayname="4 Room Apt V3 Lower Floor" zonerect="-26, -33, 12, 12" availablerect="-26, -33, 12, 12" heightmax="-5" availablepriority="-1">

<ImageFrame Source="images/maps/map_qey_4_rm_apt_v3_1.dds" SourceRect="0,0,436,506" />

</ImageStyle>

<ImageStyle Name="qey_ph_3r03_1" displayname="4 Room Apt V3 Main Floor" zonerect="-26, -33, 12, 12" availablerect="-26, -33, 12, 12" heightmin="-5" heightmax="1.5" availablepriority="-1">

<ImageFrame Source="images/maps/map_qey_4_rm_apt_v3_0.dds" SourceRect="0,0,436,506" />

</ImageStyle>

<ImageStyle Name="qey_ph_3r03_2" displayname="4 Room Apt V3 Top Floor" zonerect="-26, -33, 12, 12" availablerect="-26, -33, 12, 12" heightmin="1.5" availablepriority="-1">

<ImageFrame Source="images/maps/map_qey_4_rm_apt_v3_2.dds" SourceRect="0,0,436,506" />

</ImageStyle>

Nice, added to the updater. I removed all the availablepriority, heightmin, heightmax information because that should not be necessary (that is usually to subdivide 1 map into different parts but here we have 3 different maps) - if I'm wrong let me know and I'll add it.

Thank you. This was my first map so I am no expert. If you think it will work then I am no one to argue. Without the height limits I couldn't figure out how to make it change maps going between the levels in the apartment (single zone).

I just tested the map and only the basement appears. The only way I could get the maps to change at the different levels was with the heightmin and heightmax arguments.

Yeah I wasn't thinking straight when I did/said that, was kinda in a hurry at that time. I mean what I said was correct, only you ARE in fact subdividing one zone into several parts, so you were right to set the height levels. Added those in, sorry. ;)