EQ2Interface - Icy Keep: Retribution (in progress)

Locs done for the lower (basement) level, which is a large portion of the zone.

Haven't put textures on the map yet, but a rough (outline) view of it so far is attached. I used an intermediate size (800 tall 600 wide), at the default size it felt like there was just too much map for the space. I've also attached the DDS if anyone wants it, and tested code is below.

Comments are appreciated, this is my first attempt at real map-making. I'll be working on the second level (the base level) next.

Code for the basement (including the permafrost maps for the other regions of the zone:

Code:

<ImageStyle Name="permafrost_frostfell_raid_0" displayname="Icy Keep: Retribution Ground Floor" menugroup="Miscellaneous" zonerect="-334, -519, 313, 230" heightmin="-1" heightmax="20">

<ImageFrame Source="images/maps/map_permafrost_0.dds" SourceRect="0,0,436,506" />

</ImageStyle>

<ImageStyle Name="permafrost_frostfell_raid_3" displayname="Icy Keep: Retribution Level 2" menugroup="Miscellaneous" zonerect="-275, -787, 388, -27" heightmin="20" heightmax="41">

<ImageFrame Source="images/maps/map_permafrost_1.dds" SourceRect="0,0,436,506" />

</ImageStyle>

</ImageStyle>

<ImageStyle Name="permafrost_frostfell_raid_1" displayname="Icy Keep: Retribution Basement" menugroup="Miscellaneous" zonerect="-396, -904, 182, -132" heightmax="-1">

<ImageFrame Source="images/maps/map_permafrost_frostfell_epic_1.dds" SourceRect="0,0,600,800" />